Buy baubuero.eu ?
We are moving the project
baubuero.eu .
Are you interested in purchasing the domain
baubuero.eu ?
domain@kv-gmbh.de · 0541-91531010
Buy baubuero.eu ?
What is the guild symbol for interior decorators?
The guild symbol for interior decorators is typically a stylized representation of a room or space, often incorporating elements such as furniture, paint swatches, or design tools. The symbol may also include imagery that conveys creativity, balance, and harmony, reflecting the core principles of interior design. Additionally, the symbol may incorporate colors and shapes that evoke a sense of elegance and sophistication, representing the high standards of the profession. **
How much m³ of natural gas is needed to heat 1 m³ of water to 50 degrees?
The amount of natural gas needed to heat 1 m³ of water to 50 degrees depends on the efficiency of the heating system. On average, it takes about 0.001 cubic meters (1 liter) of natural gas to raise the temperature of 1 m³ of water by 1 degree Celsius. Therefore, to heat 1 m³ of water to 50 degrees, it would require approximately 0.05 cubic meters (50 liters) of natural gas. **
Similar search terms for Guild-M-120L-Natural-Gloss
Top-Angebote
Products related to Guild-M-120L-Natural-Gloss:
-
Gibson Songwriter Standard Gloss Natural 2024 Acoustic Guitar Gloss Natural - RefurbishedThis is a Gibson Songwriter Standard in Gloss Natural. Made in the USA in 2024 this acoustic guitar features a set-neck construction consisting of Rosewood back and sides with Spruce top, Mahogany neck and 20 fret Rosewood fingerboard. Other appointments include Mother-of-pearl Parallelogram inlays on the fingerboard, Multi-ply purfling around the top and Gold Grover tuning machines are fitted. The Mahogany neck sits comfortably in the hand, with the 'Rounded' profile resembling a ‘D’ profile, providing ergonomic thumb positioning in all registers allowing for easy navigation up and down the neck. The Rosewood fretboard feels pleasant under the fingers and provides a smooth surface for the user to explore, along with the 12” radius making bending and vibrato techniques a breeze. The dreadnought design fills the arms, providing a dynamic and responsive playing experience, making the user feel the resonance that this guitar produces. This guitar has a well-balanced and dynamic tone, producing a warm and rich sound, with a strong and clear midrange. The Solid Spruce top and Traditional Hand-scalloped bracing patterns contribute to the guitar's excellent projection and sustain, producing a bright and crisp high end that is well-articulated, whilst the Rosewood back and sides offer a warm and deep low end that make chords hum and chime. Luthier Report Our ID: 1200426202691 Weight: 4.85lbs Serial: 21634082 Aesthetic Condition: Headstock: Overall very good condition. Light indentations are present to the rear face top edge, these ave caused light delamination not exposing the wood beneath. Light scratching is present to the front face of the headstock, the most apparent of these can be seen near the crown inlay. Neck: Overall excellent condition. Very light indentations can be seen to the 2nd fret of the fingerboard, these can not be felt in the playing position and can only be seen under close scrutiny. There is some discoloration on the bottom side of the nut. Body: Overall excellent condition. All aspects of the body display light scratching which can only be seen under direct light, as is common with gloss finishes. End pin is missing and has left a hole. The hole left is too big for an end pin to be refitted as this had been widened for electronics by a previous owner. Condition of Frets: The frets demonstrate light signs of use, not affecting playability. Light denting of the frets is apparent to the early register. There is moderate material remaining for any fret work the new owner may wish to perform. Current Set Up: Truss Rod: Fully functional. Truss rod tool (5/16" socket) included. Hardware: Overall excellent condition. All aspects of the hardware display light signs of past use. End pin is missing and has left a hole. The hole left is too big for an end pin to be refitted as this had been widened for electronics by a previous owner. Structural: No concerns or issues to note. Height of the string from the 12th Fret-1.25mm - Bass 2mm Please...2190,00 £*Shipping: 0,00 £Secure redirect to the provider
-
Sigma SDM-18 Natural Gloss 2016 Acoustic Guitar Natural Gloss - RefurbishedThis is a Sigma SDM-18 Dreadnought Acoustic Guitar in Natural Gloss finish. Made in China in 2016, this guitar consists of a Solid Sitka Spruce top, Solid Mahogany back and sides, a Mahogany neck, and a 20-fret Ebony fingerboard. Other appointments include Grover Nickel Open-Gear tuners, a Bone nut and saddle, and an Ebony bridge. The Mahogany neck plays very well, with the 'Low' profile sitting very comfortably in the hand and providing easy fretting and ergonomic thumb positioning in all registers. The Ebony fingerboard is pleasant under the fingers, offering a smooth and durable playing surface, and with its 12" radius is comfortable and practical across the register. The Dreadnought body shape is comfortable in the arms, with the all-solid construction ensuring a resonant and lively experience for the player. The voice of the SDM-18 is rich and warm, the Solid Mahogany back and sides provide a silky smooth bass response that remains detailed and accurate across the dynamic range. The mids are punchy and clear, and add a warmth and clarity to the tone. The top end is sparkly and bright, adding a glistening quality to every note played on the instrument. The dynamic range of the SDM-18 is impressive. Gentle playing is rewarded with a very tender and soft tone, ramping smoothly up to the rich, loud chord strumming sound that the Dreadnought is renowned for. Luthier Report Our ID: 1040826229010 Weight: 4.4lbs Serial: 160304016 Aesthetic Condition: Headstock: Overall very good condition. The front face demonstrates very light scratching, only visible under direct light at certain angles. Any other markings to the headstock are difficult to discern. Neck: Overall very good condition. Very light scratching is apparent to the rear of the neck and fingerboard, only visible under direct light at certain angles. Body: Overall very good condition. All aspects of the body demonstrate light scratching, only visible under direct light at certain angles. The treble side lower bout side face demonstrates an indentation that has marked the finish, with notable light scuffing to the binding in the same area. Condition of Frets: The frets demonstrate light signs of use, not affecting playability. There is considerable material remaining for any fret work the new owner may wish to perform. Current Set Up: Truss Rod: Fully functional. Truss rod tool (4mm hex) not included. Hardware: Overall very good condition. Light scratching is apparent to the pickguard. Very light tarnishing is apparent to the tuners. There is considerable material remaining in the saddle for future adjustments. Structural: No concerns or issues to note. Height of the string from the 12th Fret-2.25mm - Bass 2.75mm Please be aware that the action on a guitar may move slightly in transit and this measurement is the current height. Strings on Guitar - 11-52 Electrics: N/A. Case & Accessories No case is provided with this guitar.630,00 £*Shipping: 0,00 £Secure redirect to the provider
-
Yamaha LLX6A Gloss Natural 2012 Electro-Acoustic Guitar Gloss Natural - RefurbishedThis is a Yamaha LLX6A electro-acoustic guitar in a Gloss Natural finish. Built in China in 2012, this guitar features a Solid Engelmann Spruce A.R.E. (Acoustic Resonance Enhancement) top, Rosewood back and sides, 3-ply Mahogany & Rosewood neck and a 20 fret Ebony fingerboard with matching bridge. A set of Gold sealed tuning machines are fitted along with a System 57CB 3way A.R.T. shoulder mounted system. The 3-ply Mahogany & Rosewood neck sits very comfortably in the hand, with a profile that could be described as a ‘C’, feeling slim in the hand and offering ergonomic thumb positioning up and down the neck. The Ebony fingerboard is pleasant to the touch, and with its 15.75” radius provides a nicely flat and consistent playing surface making both chordal and fingerpicking styles of playing a breeze. The LL body design fills the arms nicely, and provides a lively and responsive playing experience with a sound that can really be felt. The mixture of Solid Engelmann Spruce top and Rosewood sides provide rich, warm, and responsive sounds, this with the modified non-scalloped bracing design retains the L series’ characteristic bright tone while enhancing low-end tone. This helps to balance the highs, mids, and lows of the guitar's sound, and accommodates a wide range of playing styles and techniques. The System 57CB 3way A.R.T. system provides a natural and balanced amplified sound, faithfully reproducing the guitar's acoustic tone with the added shoulder mounted controls, this guitar provides a great plug in and play singer/songwriter guitar. Luthier Report Our ID: 1040826229070 Weight: 5.5lbs Serial Number: HIX180205 Aesthetic Condition: Headstock: Overall very good condition. The top edge of the headstock demonstrates light indentations to the rear edge, these have lightly pierced the finish and can only be seen under close scrutiny. The front face demonstrates light scratching which can only be seen under direct light, these are most apparent surrounding the tuning posts. Neck: Overall very good condition. The rear of the neck demonstrates a number of light indentations, largely around the edges, however none of which can be felt underhand in a playing position or impair playing comfort. The fingerboard displays some light lateral scratching across the register, these can be seen under direct light and can not be felt in the playing position. Body: Overall good condition. Two mild indentations are present to the front face lower bout, one located centrally and the other on the bass side both of which slightly break the finish but do not expose the wood beneath. Light indentations are also present to all aspects of the body, these can be seen under close scrutiny and have not broken the finish. Light to mild scratching is present to all aspects of the body, the most prominent of these can be seen to the center of the rear face consistent with buckle rash. Condition of Frets: The first five frets demonstrate light indentations and a flattening of...570,00 £*Shipping: 0,00 £Secure redirect to the provider
-
Excelsior Super King Gloss Natural 2009 Handmade Acoustic Guitar Gloss Natural - RefurbishedThis is a very special Excelsior Super King acoustic guitar in Gloss Natural finish. Handmade in the UK in 2009, Excelsior Guitars was started by Luthier Richard Fill and is the product of his passion for fine handcrafted instruments. 60 years of experience and fine eye for detail. This Super King guitar exudes quality and displays the utmost care for craftsmanship and excellence. This acoustic guitar features an all-solid construction comprising a AAA Spruce top, Flamed Maple back and sides, Figured Maple neck and 22/24 fret Ebony fingerboard embellished with Mother Of Pearl split block inlays. Gold hardware is featured including a unique hand-made brass tailpiece along with an Ebony adjustable bridge- also adorned with Mother Of Pearl inlays- and a set of three-a-side Grover Imperial tuning machines. Richard Fill made this guitar to get a better understanding of the bracing techniques that Jimmy D’Aquisto designed for some of his most famed instruments. The styling on this guitar is very reminiscent of D’Aquisto with the oval soundhole, tailpiece and pickguard design displaying Richard’s ‘nod of the head’ to Jimmy D’Aquisto, and faithfully so. The Figured Maple neck plays beautifully, with what might be described as an asymmetrical profile that feels particularly unique to this guitar. This sits exceptionally comfortably in the hand and provides a smooth and responsive playing experience in any register. The Ebony fingerboard is effortlessly smooth under the fingers and adds a real sense of luxury to the playing experience- especially with the binding and Mother Of Pearl inlays which perfectly suit this beautifully made guitar. The 12” radius provides a nicely flat and consistent playing surface right the way up the register, facilitating both chordal and melodic styles of playing very well. The body design is very much on the larger side, measuring 18” at the lower bout. This larger design sits very comfortably against the body without being cumbersome and offers the player a fatigue-free playing experience, making this beautiful guitar enjoyable for longer periods of playing. The acoustic voice of the Super King is rich in harmonics yet well balanced. The lows are understated yet accurate, whilst mids and treble are more prominent. This helps each note ring out with a crystal clean clarity. The hand-made nature of this guitar and wood selection results in a lively and resonant playing experience, whilst the AAA Spruce top projects very well and provides a wide and sensitive dynamic range. Richard Fill applied ‘Light’ bracing to this guitar which in turn provides the top with more ‘drive’, making chords sing proud whilst melodic lines produce rich harmonics. This is a beautifully hand-made instrument from one of the UK's most underrated luthiers, offering a guitar that displays a perfect example of a master craftsman. Luthier Report Our ID: 1180826233100 Weight: 7.6lbs Serial: 091 Aesthetic Condition: Headstock: Overall very good condition....2140,00 £*Shipping: 0,00 £Secure redirect to the provider
-
Can you keep crabs in a Juwel Lido 120l tank?
Yes, you can keep crabs in a Juwel Lido 120l tank, but it is important to ensure that the tank is suitable for the specific type of crab you want to keep. Crabs require a suitable substrate, hiding spots, and access to both land and water areas in their tank. It is also important to maintain proper water quality and temperature levels to ensure the health and well-being of the crabs. Research the specific needs of the crab species you are interested in keeping to ensure they are properly cared for in the Juwel Lido 120l tank. **
-
Can you keep crayfish in a Juwel Lido 120l tank?
Yes, you can keep crayfish in a Juwel Lido 120l tank. However, it is important to ensure that the tank is suitable for crayfish by providing enough hiding spots, places to climb, and a secure lid to prevent escape. Additionally, crayfish are known to be territorial and may become aggressive towards other tank mates, so it is best to keep them in a species-only tank. Proper filtration and water quality maintenance are also crucial for the health of crayfish in a tank. **
-
What is the difference between interior architecture and interior design?
Interior architecture focuses on the structural and spatial elements of a space, including the layout, flow, and functionality. It involves designing and coordinating the interior structure of a building, such as walls, ceilings, and floors. On the other hand, interior design focuses on the aesthetics and decorative aspects of a space, including furniture, color schemes, and accessories. It involves creating a cohesive and visually appealing environment that reflects the client's needs and style preferences. While interior architecture deals with the physical structure of a space, interior design focuses on the visual and decorative elements. **
-
What stocking options are there for a 110l or 120l tank?
For a 110-120 liter tank, stocking options can vary depending on the type of fish you want to keep. Some common stocking options include a community tank with small fish like tetras, rasboras, and guppies. Alternatively, you could opt for a species-only tank with a larger fish like angelfish or dwarf cichlids. It's important to research the specific requirements and compatibility of the fish you choose to ensure a healthy and balanced aquarium environment. **
What is better, product design or interior architecture?
The answer to whether product design or interior architecture is better ultimately depends on personal interests and career goals. Product design involves creating tangible objects that serve a specific function, while interior architecture focuses on designing interior spaces that enhance the user experience. Both fields offer unique opportunities for creativity and innovation, so it is important to consider which aligns more with your passions and strengths. Ultimately, the decision between product design and interior architecture should be based on individual preferences and career aspirations. **
How can one study architecture or interior design?
One can study architecture or interior design by enrolling in a formal education program such as a bachelor's or master's degree in architecture or interior design at a university or college. These programs typically cover design principles, building technology, history of architecture, and practical skills such as drafting and computer-aided design. Additionally, gaining practical experience through internships or apprenticeships with established architects or designers can provide valuable hands-on learning opportunities. Networking with professionals in the field and attending workshops, conferences, and exhibitions can also help in expanding one's knowledge and skills in architecture or interior design. **
Top-Angebote
Products related to Guild-M-120L-Natural-Gloss:
-
Guild M-120L Natural Gloss 2022 Concert Acoustic Guitar Natural Gloss - RefurbishedThis is a Guild M-120L Left-Handed Concert Acoustic Guitar in Natural Gloss finish. Made in China in 2022, this all-solid constructed instrument consists of a Solid African Mahogany top, Solid Mahogany back and sides, an African Mahogany neck, and a 20-fret Rosewood fingerboard. Other appointments include Guild Vintage 18 Open Gear Tuners, a Bone nut and a Rosewood bridge. The Mahogany neck feels like a comfortable ‘C’ shape and fits very well in the hand and offers excellent playability up and down the neck. The classic Gloss finish feels tactile under the thumb, adding a touch of nostalgia while the Rosewood fretboard provides a smooth playing surface. The all Solid African Mahogany body is a tried and tested winning formula for well-balanced, dynamic tone. The all-solid construction of the M-120L and the African Mahogany that are known for their rich, warm, and responsive sounds. The OX-bracing pattern is designed to maximise resonance and volume while still providing good structural support. This helps to balance the highs, mids, and lows of the guitar's sound, and accommodates a wide range of playing styles and techniques. Luthier Report Our ID: 1060626213870 Weight: 3.4lbs Serial Number: G32213072 Aesthetic Condition: Headstock: Overall excellent condition. Very light scratching is present to the front face of the headstock, these can only be sen under direct light. Neck: Overall excellent condition. All aspects of the neck and fingerboard display light signs of past use. Body: Overall excellent condition. All aspects of the body display light signs of past use. Condition of Frets: The frets demonstrate light signs of use, not affecting playability. There is moderate material remaining for any fret work the new owner may wish to perform. Current Set Up: Truss Rod: Fully functional. Truss rod tool (4mm hex) not included. Hardware: Overall excellent condition. Markings are present to the scratchlate, this is from when the protective film was applied. All aspects of the hardware display light signs of past use. Structural: No concerns or issues to note. Strings on Guitar - 11-52 Height of string from 12th Fret- Treble 1.5mm - Bass 2mm Please be aware that the action on a guitar may move slightly in transit and this measurement is the current height. There is light material remaining in the saddle for future adjustments. Electrics: N/A Case & Accessories: Guild soft shell case. Overall excellent condition and fully functional. All aspects of the case display light signs of past use.530,00 £*Shipping: 0,00 £Secure redirect to the provider
-
AFAM A525XMR3 120L ChainSeal type: Xs-ring; Chain: 525; Number of chain links: 120; Version: XMR3; Strength class: Strengthened; Colour: iron grey; Capacity (rounded) [ccm]: 250-800; Tensile strength: 3900 daN; Terminal Type: MRS; article number of recommended accessories: ARS A525XMR3, MR A525XMR3, MRS A525XMR384,49 £*Shipping: 8,45 £Secure redirect to the provider
-
Gibson Songwriter Standard Gloss Natural 2024 Acoustic Guitar Gloss Natural - RefurbishedThis is a Gibson Songwriter Standard in Gloss Natural. Made in the USA in 2024 this acoustic guitar features a set-neck construction consisting of Rosewood back and sides with Spruce top, Mahogany neck and 20 fret Rosewood fingerboard. Other appointments include Mother-of-pearl Parallelogram inlays on the fingerboard, Multi-ply purfling around the top and Gold Grover tuning machines are fitted. The Mahogany neck sits comfortably in the hand, with the 'Rounded' profile resembling a ‘D’ profile, providing ergonomic thumb positioning in all registers allowing for easy navigation up and down the neck. The Rosewood fretboard feels pleasant under the fingers and provides a smooth surface for the user to explore, along with the 12” radius making bending and vibrato techniques a breeze. The dreadnought design fills the arms, providing a dynamic and responsive playing experience, making the user feel the resonance that this guitar produces. This guitar has a well-balanced and dynamic tone, producing a warm and rich sound, with a strong and clear midrange. The Solid Spruce top and Traditional Hand-scalloped bracing patterns contribute to the guitar's excellent projection and sustain, producing a bright and crisp high end that is well-articulated, whilst the Rosewood back and sides offer a warm and deep low end that make chords hum and chime. Luthier Report Our ID: 1200426202691 Weight: 4.85lbs Serial: 21634082 Aesthetic Condition: Headstock: Overall very good condition. Light indentations are present to the rear face top edge, these ave caused light delamination not exposing the wood beneath. Light scratching is present to the front face of the headstock, the most apparent of these can be seen near the crown inlay. Neck: Overall excellent condition. Very light indentations can be seen to the 2nd fret of the fingerboard, these can not be felt in the playing position and can only be seen under close scrutiny. There is some discoloration on the bottom side of the nut. Body: Overall excellent condition. All aspects of the body display light scratching which can only be seen under direct light, as is common with gloss finishes. End pin is missing and has left a hole. The hole left is too big for an end pin to be refitted as this had been widened for electronics by a previous owner. Condition of Frets: The frets demonstrate light signs of use, not affecting playability. Light denting of the frets is apparent to the early register. There is moderate material remaining for any fret work the new owner may wish to perform. Current Set Up: Truss Rod: Fully functional. Truss rod tool (5/16" socket) included. Hardware: Overall excellent condition. All aspects of the hardware display light signs of past use. End pin is missing and has left a hole. The hole left is too big for an end pin to be refitted as this had been widened for electronics by a previous owner. Structural: No concerns or issues to note. Height of the string from the 12th Fret-1.25mm - Bass 2mm Please...2190,00 £*Shipping: 0,00 £Secure redirect to the provider
-
Sigma SDM-18 Natural Gloss 2016 Acoustic Guitar Natural Gloss - RefurbishedThis is a Sigma SDM-18 Dreadnought Acoustic Guitar in Natural Gloss finish. Made in China in 2016, this guitar consists of a Solid Sitka Spruce top, Solid Mahogany back and sides, a Mahogany neck, and a 20-fret Ebony fingerboard. Other appointments include Grover Nickel Open-Gear tuners, a Bone nut and saddle, and an Ebony bridge. The Mahogany neck plays very well, with the 'Low' profile sitting very comfortably in the hand and providing easy fretting and ergonomic thumb positioning in all registers. The Ebony fingerboard is pleasant under the fingers, offering a smooth and durable playing surface, and with its 12" radius is comfortable and practical across the register. The Dreadnought body shape is comfortable in the arms, with the all-solid construction ensuring a resonant and lively experience for the player. The voice of the SDM-18 is rich and warm, the Solid Mahogany back and sides provide a silky smooth bass response that remains detailed and accurate across the dynamic range. The mids are punchy and clear, and add a warmth and clarity to the tone. The top end is sparkly and bright, adding a glistening quality to every note played on the instrument. The dynamic range of the SDM-18 is impressive. Gentle playing is rewarded with a very tender and soft tone, ramping smoothly up to the rich, loud chord strumming sound that the Dreadnought is renowned for. Luthier Report Our ID: 1040826229010 Weight: 4.4lbs Serial: 160304016 Aesthetic Condition: Headstock: Overall very good condition. The front face demonstrates very light scratching, only visible under direct light at certain angles. Any other markings to the headstock are difficult to discern. Neck: Overall very good condition. Very light scratching is apparent to the rear of the neck and fingerboard, only visible under direct light at certain angles. Body: Overall very good condition. All aspects of the body demonstrate light scratching, only visible under direct light at certain angles. The treble side lower bout side face demonstrates an indentation that has marked the finish, with notable light scuffing to the binding in the same area. Condition of Frets: The frets demonstrate light signs of use, not affecting playability. There is considerable material remaining for any fret work the new owner may wish to perform. Current Set Up: Truss Rod: Fully functional. Truss rod tool (4mm hex) not included. Hardware: Overall very good condition. Light scratching is apparent to the pickguard. Very light tarnishing is apparent to the tuners. There is considerable material remaining in the saddle for future adjustments. Structural: No concerns or issues to note. Height of the string from the 12th Fret-2.25mm - Bass 2.75mm Please be aware that the action on a guitar may move slightly in transit and this measurement is the current height. Strings on Guitar - 11-52 Electrics: N/A. Case & Accessories No case is provided with this guitar.630,00 £*Shipping: 0,00 £Secure redirect to the provider
-
What is the guild symbol for interior decorators?
The guild symbol for interior decorators is typically a stylized representation of a room or space, often incorporating elements such as furniture, paint swatches, or design tools. The symbol may also include imagery that conveys creativity, balance, and harmony, reflecting the core principles of interior design. Additionally, the symbol may incorporate colors and shapes that evoke a sense of elegance and sophistication, representing the high standards of the profession. **
-
How much m³ of natural gas is needed to heat 1 m³ of water to 50 degrees?
The amount of natural gas needed to heat 1 m³ of water to 50 degrees depends on the efficiency of the heating system. On average, it takes about 0.001 cubic meters (1 liter) of natural gas to raise the temperature of 1 m³ of water by 1 degree Celsius. Therefore, to heat 1 m³ of water to 50 degrees, it would require approximately 0.05 cubic meters (50 liters) of natural gas. **
-
Can you keep crabs in a Juwel Lido 120l tank?
Yes, you can keep crabs in a Juwel Lido 120l tank, but it is important to ensure that the tank is suitable for the specific type of crab you want to keep. Crabs require a suitable substrate, hiding spots, and access to both land and water areas in their tank. It is also important to maintain proper water quality and temperature levels to ensure the health and well-being of the crabs. Research the specific needs of the crab species you are interested in keeping to ensure they are properly cared for in the Juwel Lido 120l tank. **
-
Can you keep crayfish in a Juwel Lido 120l tank?
Yes, you can keep crayfish in a Juwel Lido 120l tank. However, it is important to ensure that the tank is suitable for crayfish by providing enough hiding spots, places to climb, and a secure lid to prevent escape. Additionally, crayfish are known to be territorial and may become aggressive towards other tank mates, so it is best to keep them in a species-only tank. Proper filtration and water quality maintenance are also crucial for the health of crayfish in a tank. **
Similar search terms for Guild-M-120L-Natural-Gloss
-
Yamaha LLX6A Gloss Natural 2012 Electro-Acoustic Guitar Gloss Natural - RefurbishedThis is a Yamaha LLX6A electro-acoustic guitar in a Gloss Natural finish. Built in China in 2012, this guitar features a Solid Engelmann Spruce A.R.E. (Acoustic Resonance Enhancement) top, Rosewood back and sides, 3-ply Mahogany & Rosewood neck and a 20 fret Ebony fingerboard with matching bridge. A set of Gold sealed tuning machines are fitted along with a System 57CB 3way A.R.T. shoulder mounted system. The 3-ply Mahogany & Rosewood neck sits very comfortably in the hand, with a profile that could be described as a ‘C’, feeling slim in the hand and offering ergonomic thumb positioning up and down the neck. The Ebony fingerboard is pleasant to the touch, and with its 15.75” radius provides a nicely flat and consistent playing surface making both chordal and fingerpicking styles of playing a breeze. The LL body design fills the arms nicely, and provides a lively and responsive playing experience with a sound that can really be felt. The mixture of Solid Engelmann Spruce top and Rosewood sides provide rich, warm, and responsive sounds, this with the modified non-scalloped bracing design retains the L series’ characteristic bright tone while enhancing low-end tone. This helps to balance the highs, mids, and lows of the guitar's sound, and accommodates a wide range of playing styles and techniques. The System 57CB 3way A.R.T. system provides a natural and balanced amplified sound, faithfully reproducing the guitar's acoustic tone with the added shoulder mounted controls, this guitar provides a great plug in and play singer/songwriter guitar. Luthier Report Our ID: 1040826229070 Weight: 5.5lbs Serial Number: HIX180205 Aesthetic Condition: Headstock: Overall very good condition. The top edge of the headstock demonstrates light indentations to the rear edge, these have lightly pierced the finish and can only be seen under close scrutiny. The front face demonstrates light scratching which can only be seen under direct light, these are most apparent surrounding the tuning posts. Neck: Overall very good condition. The rear of the neck demonstrates a number of light indentations, largely around the edges, however none of which can be felt underhand in a playing position or impair playing comfort. The fingerboard displays some light lateral scratching across the register, these can be seen under direct light and can not be felt in the playing position. Body: Overall good condition. Two mild indentations are present to the front face lower bout, one located centrally and the other on the bass side both of which slightly break the finish but do not expose the wood beneath. Light indentations are also present to all aspects of the body, these can be seen under close scrutiny and have not broken the finish. Light to mild scratching is present to all aspects of the body, the most prominent of these can be seen to the center of the rear face consistent with buckle rash. Condition of Frets: The first five frets demonstrate light indentations and a flattening of...570,00 £*Shipping: 0,00 £Secure redirect to the provider
-
Excelsior Super King Gloss Natural 2009 Handmade Acoustic Guitar Gloss Natural - RefurbishedThis is a very special Excelsior Super King acoustic guitar in Gloss Natural finish. Handmade in the UK in 2009, Excelsior Guitars was started by Luthier Richard Fill and is the product of his passion for fine handcrafted instruments. 60 years of experience and fine eye for detail. This Super King guitar exudes quality and displays the utmost care for craftsmanship and excellence. This acoustic guitar features an all-solid construction comprising a AAA Spruce top, Flamed Maple back and sides, Figured Maple neck and 22/24 fret Ebony fingerboard embellished with Mother Of Pearl split block inlays. Gold hardware is featured including a unique hand-made brass tailpiece along with an Ebony adjustable bridge- also adorned with Mother Of Pearl inlays- and a set of three-a-side Grover Imperial tuning machines. Richard Fill made this guitar to get a better understanding of the bracing techniques that Jimmy D’Aquisto designed for some of his most famed instruments. The styling on this guitar is very reminiscent of D’Aquisto with the oval soundhole, tailpiece and pickguard design displaying Richard’s ‘nod of the head’ to Jimmy D’Aquisto, and faithfully so. The Figured Maple neck plays beautifully, with what might be described as an asymmetrical profile that feels particularly unique to this guitar. This sits exceptionally comfortably in the hand and provides a smooth and responsive playing experience in any register. The Ebony fingerboard is effortlessly smooth under the fingers and adds a real sense of luxury to the playing experience- especially with the binding and Mother Of Pearl inlays which perfectly suit this beautifully made guitar. The 12” radius provides a nicely flat and consistent playing surface right the way up the register, facilitating both chordal and melodic styles of playing very well. The body design is very much on the larger side, measuring 18” at the lower bout. This larger design sits very comfortably against the body without being cumbersome and offers the player a fatigue-free playing experience, making this beautiful guitar enjoyable for longer periods of playing. The acoustic voice of the Super King is rich in harmonics yet well balanced. The lows are understated yet accurate, whilst mids and treble are more prominent. This helps each note ring out with a crystal clean clarity. The hand-made nature of this guitar and wood selection results in a lively and resonant playing experience, whilst the AAA Spruce top projects very well and provides a wide and sensitive dynamic range. Richard Fill applied ‘Light’ bracing to this guitar which in turn provides the top with more ‘drive’, making chords sing proud whilst melodic lines produce rich harmonics. This is a beautifully hand-made instrument from one of the UK's most underrated luthiers, offering a guitar that displays a perfect example of a master craftsman. Luthier Report Our ID: 1180826233100 Weight: 7.6lbs Serial: 091 Aesthetic Condition: Headstock: Overall very good condition....2140,00 £*Shipping: 0,00 £Secure redirect to the provider
-
Rivolta Regatta VII Gloss Natural Semi-Hollow Electric Guitar Gloss Natural - RefurbishedThis is a Rivolta Regatta VII semi-hollow electric guitar in Gloss Natural finish. This guitar is composed of a semi-hollow body made out of Laminated Maple top and back with Mahogany sides and Mahogany centre block. A Mahogany neck is set in with a 24 fret Ebony fingerboard. Other appointments include Wilkinson Deluxe tuning machines and TOM style bridge and stopbar tailpiece. A pair of Rivolta Brevetto humbuckers are fitted and wired to a 3-way pickup selector, volume and tone. The gloss-finished Mahogany neck sports a 'Rivolta C+' neck profile that feels like a slightly deeper "C" shape and fills the hand well whilst still being incredibly comfortable. The double cutaway design gives the player unrestricted access to the upper register of the guitar. The semi-hollow body provides a wonderful amount of both sustain and resonance, providing a really authentic vintage feel that is in line with the guitar's timeless aesthetic. Amplified, the pair of Rivolta Brevetto humbuckers work in conjunction with the semi-hollow construction to deliver the full and thick sounds. The guitar resonates beautifully, filling out the sound with a deep and rich character. The neck pickup is warm and round, and can handle plenty of gain meaning you can achieve anything from jazzy lines through to soaring rock and blues solo tones. The bridge pickup is hotter, driving the front end of an amp with ease and producing the bright, biting tones that cut right through the mix to put your playing front and centre. Luthier Report Our ID: 1030826228790 Weight: 7.15lbs Serial: VA2004433 Aesthetic Condition: Headstock: Overall very good condition. All aspects of the headstock demonstrate very light scratching, only visible under direct light at certain angles. An indetation is apparent to the rear face edge of the very tip, marking but not removing any of the finish. Neck: Overall excellent condition. Any markings to the neck and fingerboard are difficult to discern. Body: Overall very good condition. All aspects of the body demonstrate very light scratching, only visible under direct light at certain angles. Any other markings to the body are difficult to discern. Condition of Frets: The frets demonstrate light signs of use, not affecting playability. There is considerable material remaining for any fret work the new owner may wish to perform. Current Set Up: Truss Rod: Fully functional. Truss rod tool (4mm hex) not included. Hardware: Fully functional and very good condition. Light scratching and tarnishing is apparent to the bridge, tailpiece, tuners and pickup covers. Light concentrated scratching is apparent to the pickguard. Structural: No concerns or issues to note. Height of the string from the 12th Fret-1.5mm - Bass 2mm Please be aware that the action on a guitar may move slightly in transit and this measurement is the current height. Strings on Guitar - 10-46 Electrics: Fully functional. Case & Accessories Rivolta Soft Case Fully functional and very good condition. All...740,00 £*Shipping: 0,00 £Secure redirect to the provider
-
Hagstrom HJ500 Gloss Natural 2006 Hollow Body Electric Guitar Gloss Natural - RefurbishedThis is a Hagstrom HJ500 in Gloss Natural finish. Built in China in 2006, this guitar features a set neck construction comprising a Canadian Maple hollow body, a Canadian Maple and 22 fret Composite Resinator fingerboard. Chrome hardware is fitted including a Hagstrom Tailpiece, an Ebony-based Adjusto-Matic bridge and a set of sealed Hagstrom tuning machines. The pickups installed are a pair of Hagstrom HJ-50 humbuckers which are wired to a 3-way toggle switch. master volume, master tone and independent pickup volume controls. The Canadian Maple neck sits comfortably in hand, with a profile resembling a ‘C’ shape, feeling slim and quick in the hand and providing a comfortable and ergonomic playing surface. The Gloss finish to the rear of the neck ensures effortless navigation of the 25.5” scale, whilst the single cutaway enhances access to the upper frets. The Composite Resinator fingerboard with its 15” radius provides a nicely flat and consistent playing experience right the way up the register, perfect for smooth jazzy lead lines as well as tricky chord voicings. The acoustic voice of the Hagstrom HJ500 is bright and snappy thanks to its Maple construction. The large body produces ample dynamic range which feels very responsive to the player’s touch. Coupled with the Hagstrom HJ-50 humbucking pickups, the tone is thick and warm, perfect for a wide range of playing styles and techniques. A distinct top-end that is articulate and well-defined is well complemented by open and clear mids. The controls offer plenty of flexibility, with independent volumes allowing you to finely blend both pickups in the middle position. Luthier Report Our ID: 1220725119410 Weight: 6.5lbs Serial: M06061877 Aesthetic Condition: Headstock: Overall excellent condition, it is difficult to discern any markings to the headstock. Neck: Overall excellent condition. Light lacquer cracking is present at either side of the fingerboard in the early register. This has been tested and presents no structural concern. It is difficult to discern any other markings to the neck and fingerboard. Body: Overall very good condition. A light lacquer crack is present at the treble side of the neck heel in the cutaway. This has been tested and presents no structural concern. Light indentation & scratching to all aspects of the body is visible under direct light & close scrutiny, as is common with high gloss finishes. Condition of Frets: The frets demonstrate very light signs of use, not affecting playability. There is considerable material remaining for any future fret work the new owner may wish to perform. Current Set Up: Truss Rod: fully functional. Truss rod tool (3mm hex) not included. Hardware: Very good condition with tarnishing of the tailpiece and pickup covers. Structural: No concerns or issues to note. Height of the string from the 12th Fret-1.5mm - Bass 2mm Please be aware that the action on a guitar may move slightly in transit and this measurement is the current height. Strings...500,00 £*Shipping: 0,00 £Secure redirect to the provider
-
What is the difference between interior architecture and interior design?
Interior architecture focuses on the structural and spatial elements of a space, including the layout, flow, and functionality. It involves designing and coordinating the interior structure of a building, such as walls, ceilings, and floors. On the other hand, interior design focuses on the aesthetics and decorative aspects of a space, including furniture, color schemes, and accessories. It involves creating a cohesive and visually appealing environment that reflects the client's needs and style preferences. While interior architecture deals with the physical structure of a space, interior design focuses on the visual and decorative elements. **
-
What stocking options are there for a 110l or 120l tank?
For a 110-120 liter tank, stocking options can vary depending on the type of fish you want to keep. Some common stocking options include a community tank with small fish like tetras, rasboras, and guppies. Alternatively, you could opt for a species-only tank with a larger fish like angelfish or dwarf cichlids. It's important to research the specific requirements and compatibility of the fish you choose to ensure a healthy and balanced aquarium environment. **
-
What is better, product design or interior architecture?
The answer to whether product design or interior architecture is better ultimately depends on personal interests and career goals. Product design involves creating tangible objects that serve a specific function, while interior architecture focuses on designing interior spaces that enhance the user experience. Both fields offer unique opportunities for creativity and innovation, so it is important to consider which aligns more with your passions and strengths. Ultimately, the decision between product design and interior architecture should be based on individual preferences and career aspirations. **
-
How can one study architecture or interior design?
One can study architecture or interior design by enrolling in a formal education program such as a bachelor's or master's degree in architecture or interior design at a university or college. These programs typically cover design principles, building technology, history of architecture, and practical skills such as drafting and computer-aided design. Additionally, gaining practical experience through internships or apprenticeships with established architects or designers can provide valuable hands-on learning opportunities. Networking with professionals in the field and attending workshops, conferences, and exhibitions can also help in expanding one's knowledge and skills in architecture or interior design. **
* All prices are inclusive of VAT and, if applicable, plus shipping costs. The offer information is based on the details provided by the respective shop and is updated through automated processes. Real-time updates do not occur, so deviations can occur in individual cases. ** Note: Parts of this content were created by AI.